2014 Jeep Rubicon Edelbrock Supercharger Install

2014 Jeep Rubicon Edelbrock Supercharger Install

Posted in Portfolio, Projects

Here is a 2014 Rubicon with the brand new Edelbrock E-Force supercharger kit we just finished. The mighty 3.7 works very well now with the kit.  We also installed 4.88:1 gears to help motivate the large 37″ diameter tires. For all of those there were worried about drivability issues with this kit and the supplied tuning – we have experienced zero...

Read More

1968 Lincoln custom 3″ mandrel exhaust

1968 Lincoln custom 3″ mandrel exhaust

Posted in Portfolio, Projects

Here is a a custom 3″ mandrel exhaust we built for a 1968 Lincoln. Customer is eventually building a motor for it and re doing the suspension, etc etc etc, but in the mean time wanted the car to sound cool. We used Mild steel mandrels and mig welded it – customer didn’t want a show car. Even tho its a 1968, there is very little real estate to route the tubing through this car – everything interferes. The crappy black on it is a Duplicolor High Heat...

Read More

1968 Ford Mustang

1968 Ford Mustang

Posted in Projects

All done sitting on the ground on 4 tires again. All the old suspension out of the car Mocking upper control arm mounts Main cross member tack welded into place Heidts quality of product is second to none! painted, welded and done This Mustang, when finished, will be a 408 stroked Windsor based SBF with either a single or twin turbo setup ( Customer is still trying to make up his mind) which the customer is insistent of reaching 1000HP!  This Mustang will also boast a...

Read More

Procharged 68 Camaro

Procharged 68 Camaro

Posted in Projects

Procharger F1X Supercharger installation on a customers 1968 Chevy Camaro. 496 cubic inch motor … estimating 1000 hp at the flywheel with a totally streetable  engine combination complete with fuel injection, air conditioning and power steering.  More pics and dyno results to come upon completion … Update 5/16/14: Finished intercooler mounting and starting on the boost tube fabrication. Working on the front section of the 8.50 legal roll cage Mocking up charge...

Read More

1940 Ford Sedan

1940 Ford Sedan

Posted in Projects

This 1940 Ford Sedan is currently at JEP for some minor paint and body repair, complete wiring, suspension work and exhaust. Additional pics and information on this build soon to come …   Update 5/15/14 Finish fabricating the upper and lower radiator hoses out of mild steel (going to be chrome plated later) for better clearance Also, trunk is almost finished with optima battery installed and upholstery almost done.  ...

Read More